Javta insulation panel
Flat board 1,200 x 2,440 mm - PU/PIR core with cement board or foil on both faces
Javta insulation panel
Flat insulation board 1,200 x 2,440 mm with a PU/PIR core at 40 – 60 kg/m³, 20 – 50 mm thick, faced both sides in cement board or foil.
Product overview
The Javta insulation board is a flat board 1,200 x 2,440 mm with a PU/PIR core between two layers of cement board or foil — for ceiling and wall linings, roof underlays, or added insulation on an existing building.
At only 0.8 – 2.2 kg per board it goes up quickly and needs no structural strengthening.
Technical specifications
| Exterior finish | Cement board or patterned foil layer — Double-sided |
|---|---|
| Insulation core | PU / PIR |
| Density | 40 – 60 kg/m³ |
| Thickness | 20 – 30 – 40 – 50 mm |
| Weight | 0.8 – 2.2 kg per sheet — Depends on thickness |
| Product dimensions | 1,200 x 2,440 mm |
Cement board / foil facing layerThe top face, which takes light impact and finishes easily.
PU/PIR layerInsulation core at 40 – 60 kg/m³, 20 – 50 mm thick.
Cement board / foil facing layerUnderside, matched to the top face.
In use on site
Building wall cladding
Added insulation for masonry walls
Ceiling cladding
Cuts the heat radiated down from the roof
Specifications & options
- Board size: 1,200 x 2,440 mm
- Thickness: 20 / 30 / 40 / 50 mm
- PU/PIR core at 40 – 60 kg/m³
- Weight: 0.8 – 2.2 kg per board
- Facing: cement board or patterned foil (both sides)
- Source: Phu Son Group 2026 Catalogue
Related products
View all
PIR insulated panel
The PIR panel uses a polyisocyanurate core — an upgrade on PU with a more thermally stable closed-cell structure. It has the lowest thermal conductivity of any of our panels and better fire performance, which suits cold stores and cleanrooms.
View specifications
PU Insulated Panel
The PU (polyurethane) panel is an effective insulation solution built around a rigid, high-density PU core that blocks heat transfer, saves energy and keeps the internal environment stable. It is produced on modern lines, installs quickly and suits a wide range of projects.
View specifications
EPS insulated panel
The EPS panel uses an expanded polystyrene core, balancing insulation against cost. Light and quick to install, it is the economical choice for partitions, ceilings and factory cladding.
View specifications
Acoustic glass wool panel
The glass wool panel uses a glass fibre core — lighter than rock wool but still non-combustible, a good sound absorber and environmentally friendly. It suits partitions, ceilings and anywhere needing acoustic treatment.
View specifications
Fire-resistant rock wool panel
The rock wool panel uses a stone mineral wool core — all but non-combustible and a good sound absorber. The choice for fire compartmentation, fire-rated walls and heavy industrial buildings.
View specifications
Quick consultation – get the right solution
Phu Son Group's engineering team is ready to advise you and turn around a quote quickly.